Cylinder Block Assembly: Specifications

TIGHTENING SPECIFICATIONS
Bolt For Bearing Housing 9x150 mm 22 Nm (16 ft. lbs.)
Bolt For Bearing Housing 9x94 mm 22 Nm (16 ft. lbs.)
Bolt For Crankcase Halves 6 mm 13 Nm (10 ft. lbs.)
Bolt For Bearing Housing 22 Nm (16 ft. lbs.)
Plug For Assembly Bore Of Piston Pin 80 Nm (59 ft. lbs.)
Belt Pulley to Crankshaft
Initial Tightening: 50 Nm (37 ft. lbs.)
Final Tightening: 1 x 90 degrees
Crankshaft Axial Play
New Installation: 0.05 to 0.24 mm
Wear Limit: 0.28 mm