Operation CHARM: Car repair manuals for everyone.
Home >> Porsche >> 2003 >> Boxster (986) F6-2.7L >> Repair and Diagnosis >> Heating and Air Conditioning >> Condenser Fan >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Condenser Fan: Service and Repair




Removing and installing fan for condenser

Removal
1. Remove front wheel, wheel housing liner and wing support.






2. Detach cooler bracket from the body (1 nut, 2 M8 screws). Unclip ventilation hose and ballast resistor. Undo retaining clips from the cooler and pull off the cooler bracket downwards.






3. Disconnect the electrical plug connection and undo retaining clips from the fan housing. Pull fan housing out of the holder, bending up the ventilation hose on the cooler at the same time.






4. Detach fan motor from the fan housing and remove.

Installation
1. After installation, check whether the fan can rotate freely.
2. Tighten front wheel to the specified torque (130 Nm (96 ft lb.)).
pro multis · About Operation CHARM