Fuse Carrier/Support Location

Fuse Support Location

Fuse Holder Location:

The electric fuses are installed at the A-pillar on the driver's side and are easily accessible.

A clip used to remove the fuses is inserted in the lower part of the fuse holder.




The fuse assignment table with the usual language variants is inserted inside the cover.

The appropriate language variant of the fuse assignment table can be folded to face outwards and then inserted again.

The power circuits have been precisely configured. No other connectors should be connected. This does not apply to fuse output D 10. Systems whose power consumption does not exceed 5 A may be connected to this fuse output.