Operation CHARM: Car repair manuals for everyone.
Home >> Porsche >> 2003 >> Boxster (986) F6-2.7L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - HVAC >> Control Module HVAC >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Module HVAC: Service and Repair




Removing and installing blower motor driver

Removal






1. Remove footwell bulkhead and right air guide. Unscrew fastening screw and detach the blower driver from the heating/air-conditioning unit housing from below.
2. Pull blower driver out of the upper bracket and remove in downward direction.
3. Pull off the electrical plug connection.

Installation
1. Engage the electrical plug connection and slide the blower driver into the upper bracket.
2. Tighten the fastening screw carefully (plastic housing). Install the air guide and footwell bulkhead.
3. Perform function test on heater/fresh-air blower motor.

pro multis · About Operation CHARM