Allocation of Free Fuse Connection Points

Allocation Of Free Fuse Connection Points

CAUTION: Additional loads must not be connected to the existing "free" fuse locations in the fuse box.

One exception is fuse D 10 (see wiring diagram, connection point retrofit max. 5 A).

The load on the fusible elements in the current distributor was carefully set during development. Connecting additional loads could lead to an overload in the current distributor or to disturbances in the vehicle electrical system.

If an external load should nevertheless be installed subsequently, this must be connected directly to B+ with corresponding fuse protection (line fuse). Cables can be routed into the passenger compartment through the service opening in the firewall (closed off by a rubber sleeve behind the battery) and the appropriate seal.