Instructions For Fitting Diagonal Control Arm on Control Arm - GT2

Instructions for fitting diagonal control arm on control arm - GT2

Note:
^ In the case of the road version of the GT2 (M002 and M003), the diagonal control arm must be fitted at the center bore (No. 1) of the control arm.

Control arm, left





A Control arm, left
C Direction of travel
1 Center bore for GT2 road model
2 Rear bore only for Cup vehicle (with racing circuit camber values)

Control arm, right





B Control arm, right
C Direction of travel
1 Center bore for GT2 road model
2 Rear bore only for Cup vehicle (with racing circuit camber values)