Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Removing and Installing Sensor For Transmission Input Speed
Removing and installing sensor for transmission input speed Note! ^
Do not reuse speed sensors that have been dropped (permanent magnet breaks).
Removal 1.
Remove hydraulic control unit.
2.
Remove sensor.
1
Sensor
2
Spacer sleeves (height
20 mm)
Installation 1.
Using the two spacer sleeves, install sensor and tighten fastening screws to
6 Nm (4 ft. lbs.).
