Wiper Motor Linkage: Service and Repair

Removing And Installing Wiper Linkage

Technical values







Preliminary work

Preliminary work for wiper linkage
Remove wiper arms.

Remove cowl panel cover.

Disconnect the battery.

Removing wiper linkage







1. Unscrew the three fastening screws -3- for the wiper linkage and release and unplug the electric connector for the wiper motor.
2. Remove wiper linkage. If the wiper motor must be removed from the wiper linkage, then proceed according to "Removing and installing wiper motor".

Installing wiper linkage
1. If necessary, fit the wiper motor to the wiper linkage.







2. Position wiper linkage in the radiator tank and screw down the fastening screws -3A, 3B, 3,C- in turn.
Tightening torque: 10 Nm (7.5 ftlb.)

Subsequent work

Reworking wiper link
Left plenum chamber cover.

Connect battery.