Operation CHARM: Car repair manuals for everyone.
Home >> Porsche >> 2005 >> Cayenne (9PA) V6-3.2L >> Repair and Diagnosis >> Heating and Air Conditioning >> Evaporator Temperature Sensor / Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Evaporator Temperature Sensor / Switch: Service and Repair



Removing And Installing Temperature Sensors/Interior Temperature Sensors On Heater

Information







NOTE:
- Vehicles with manual air conditioner only have the evaporator temperature sensor -1- installed.
- Before removing the temperature sensors/interior temperature sensors, switch off the ignition and remove the ignition key.

Preliminary work

Preliminary work - evaporator temperature sensor
Remove glove compartment.

Removing the evaporator temperature sensor







1. Turn temperature sensor -1- 90 degrees and remove from the heating/air-conditioning unit.
2. Press latch on the electric connector for the sensor -1- -arrows a- and pull off the connector.

Installing the evaporator temperature sensor







1. Insert the electric connector into the sensor -1- until the connector is felt to engage.
2. Slide in the temperature sensor -1- into the heating/air-conditioning unit and turn 90 degrees.

Subsequent work

Touch up - evaporator temperature sensor
Install glove compartment.
pro multis · About Operation CHARM