Fastener Tightening Torques

Connecting Rod Bolt 20 Nm (15 ftlb.) + 110°

Coolant pump screws 10 Nm (7.5 ftlb.)
Tighten all screws equally in diagonally opposite sequence.

Oil pump to crankcase 45 Nm (33 ftlb.)

Drive plate to crankshaft 25 Nm (19 ft.lb) + 120°
Tighten fastening screws in diagonally opposite sequence.

Double-mass flywheel to crankshaft 19 ft.lb + 120°
Tighten fastening screws in diagonally opposite sequence.

Exhaust manifold 23 Nm (17 ftlb.)
Tighten screws from the inside out and in diametrically opposite sequence.

Intake manifold 10 Nm (7.5 ftlb.)

Vibration damper to crankshaft 37 ftlb. + 120°





Cylinder Head Bolts
Step 1: 30 Nm (22 ftlb.)
Step 2: Loosen in reverse order
Step 3: 20 Nm (15 ftlb.)
Step 4: 70°
Step 5: 70°





External cylinder head screws 10 Nm (7.5 ftlb.)

Camshaft housing to cylinder head 10 Nm (7.5 ftlb.)





Gear Carrier Screws 22 Nm (16 ftlb.)

Auxiliary screw for gear carrier 20 Nm (15 ftlb.)