Completing Reconditioned Engine

Completing reconditioned engine

Note:
^ In order to replace the old, removed engine with a new one, some re-fitting work must be done.
^ Starting point for re-fitting work: old engine is secured to assembly support and the new one is in the transport cradle.
^ At higher mileages, components (cooling hoses, clips etc.) must be checked for damage and, if necessary, replaced.

1. Remove numerous transport plugs for water and vacuum connection pieces of the new engine.
2. Check that all leads and hoses between the engines have been re-fitted and no component has been forgotten.
3. Depending on the transmission version, the drive plate' or flywheel' must be re-fitted.