Operation CHARM: Car repair manuals for everyone.
Home >> Porsche >> 2006 >> Cayman S (987) F6-3.4L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Knock Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Knock Sensor: Service and Repair



Removing And Installing Knock Sensor

Preliminary work for removing knock sensor

1. Place protective covers on the vehicle to avoid damaging the body.
2. Remove intake-air distributor.

Removing knock sensor
1. Release and disconnect cable plug-1-.
2. Mark installation position of knock sensor so that cable plug can be reconnected after installation.
3. Remove knock sensor -3- by unscrewing the Torx screw (M8 x 35) -2-.







Installing knock sensor
1. Insert knock sensor -3- in the original position and then screw in and tighten the Torx screw (M8 x 35) -2-.
Tightening torque: 15 ftlb..
2. Push on cable plug -1-.







Subsequent work for installing knock sensor
1. Install intake-air distributor for the relevant cylinder bank.
pro multis · About Operation CHARM