Exterior Lighting Module: Service and Repair

Removing And Installing Control Unit For Cornering Light

Preliminary work
1. Switch off ignition and remove ignition key.
2. Remove front luggage compartment trim panel.

Removing control unit for cornering light







1. Pull off foam part on the body.







2. Pull cornering light control unit out of the foam part in the sequence -1, 2, 3-.







3. Release and unplug electric connector -A-.

Installing control unit for cornering light







1. Plug in electric connector.







2. Insert control unit into the two holders. Make sure it is seated securely.

Installing control unit for cornering light







1. Plug in electric connector until it engages securely.







2. Insert cornering light control unit into the foam part in the sequence -1, 2, 3-.
3. Stick foam part to the body.
3.1. Make sure that there is adhesive on the foam part.







3.2. Position the foam part and press it onto the body.

Subsequent work
1. Install front luggage compartment trim panel.