Operation CHARM: Car repair manuals for everyone.
Home >> Porsche >> 2009 >> Cayenne GTS (9PA) V8-4.8L >> Repair and Diagnosis >> Heating and Air Conditioning >> Ambient Temperature Sensor / Switch HVAC >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ambient Temperature Sensor / Switch HVAC: Service and Repair


WM 872219 Removing and installing air-quality sensor

Preliminary work

Partially detach the cowl panel cover. Loosen fastening screws and lift the cover. -> 664419 Removing and installing cowl panel cover - section on "removing" Service and Repair

Removing air-quality sensor

Information

- The air quality sensor is located in the direction of travel tucked under the cowl panel cover on the left side.

1. Lift cover -arrow A- , release the sensor -arrow B- and pull down from the mount - cowl panel cover -arrow C-.





Removing air quality sensor

2. Release plug -a- and remove from sensor.





Pulling off plug

3. Remove air quality sensor.

Installing air-quality sensor

1. Push plug onto air quality sensor until it is felt to engage.





Plugging in connector

2. Push sensor onto mount - cowl panel cover - until the sensor clicks into place. Check it is secure.





Installing air quality sensor

Subsequent work

Position cowl panel cover and screw down with the fastening screws. -> 664419 Removing and installing cowl panel cover - section on "installing" Service and Repair
pro multis · About Operation CHARM