Operation CHARM: Car repair manuals for everyone.
Home >> Porsche >> 2010 >> Boxster (987) F6-2.9L >> Repair and Diagnosis >> Body and Frame >> Bumper >> Front Bumper >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Bumper: Service and Repair


WM 631019 Removing and installing front bumper

Technical values





Preliminary work

1. Remove front apron. -> 631519 Removing and installing front apron - section on "Removing"

Information

Only open for vehicles with garage door function.

2. Remove control unit for garage door opener. -> 967919 Removing and installing garage door opener control unit - section on "Removing" 96791900 Removing and installing garage door opener control unit

Removing front bumper





Installation position of front bumper

1. Unscrew fastening screws -1- and remove bumper -2-.





Removing the front bumper

Installing front bumper





Installation position of front bumper

1. Position bumper -2-.





Installing the front bumper

2. Screw in fastening screws -1- and tighten to the specified tightening torque. Tightening torque => Final tightening: 63 ftlb.

Subsequent work

Information

Only open for vehicles with garage door function.

1. Install control unit for garage door opener. -> 967919 Removing and installing garage door opener control unit - section on "Installing" 96791900 Removing and installing garage door opener control unit
2. Install front apron. -> 631519 Removing and installing front apron - section on "Installing"
pro multis · About Operation CHARM