Operation CHARM: Car repair manuals for everyone.
Home >> Porsche >> 2010 >> Boxster (987) F6-2.9L >> Repair and Diagnosis >> Lighting and Horns >> Brake Light Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Light Switch: Service and Repair


WM 943619 Removing and installing brake light switch

Removing brake light switch





Overview of stop light switch, shown on the 911

1. Switch off ignition and remove ignition key.
2. Disengage plug from stop light switch on both sides (Arrows a) and remove.





Disconnecting plug for stop light switch

3. Turn brake light switch 90° counter-clockwise and remove it.





Removing stop light switch

Installing brake light switch

Installing stop light switch

Information

- The brake light switch setting is firmly fixed and is not adjustable!

- The brake light switch may be fitted only once in order to ensure that it fits tightly!

1. Before fitting the stop light switch, pull out the plunger (arrow) out of the stop light switch until the stop.





Installing stop light switch

2. Insert stop light switch with the bayonet lock take-up bore, press in, and turn clockwise by 90°. This sets the tappet push rod to the exact length.
3. Position and insert the plug until it is felt to engage.





Connecting stop light switch plug
pro multis · About Operation CHARM