Hood: Service and Repair

WM 552219 Removing and installing front lid

Technical values





Removing front lid





1. Open front lid.
2. Remove insulation for front lid -> 700419 Removing and installing insulation for front lid - section on "Removing"
3. Remove wire harness on front lid -> 971319 Removing and installing wire harness on front lid - section on "Removing" 971519 Removing and Installing Front Wire Harness
4. Remove pneumatic spring on front lid -> 553119 Removing and installing pneumatic spring on front lid - section on "Removing" Service and Repair
5. Remove front lid.
5.1. Undo fastening nuts -2- and unscrew from the studs -Arrow A-.
5.2. Remove -1- front lid -Arrow B-.










Installing front lid





1. Install front lid.
1.1. Position -1- front lid -Arrow A-.
1.2. Screw fastening nuts -2- onto studs and position carefully -Arrow B-.









2. Install pneumatic spring on front lid -> 553119 Removing and installing pneumatic spring on front lid - section on "Installing" Service and Repair
3. Adjust front lid -> 552215 Adjusting front lid Adjustments.
4. Tighten fastening nuts -2- => Tightening torque: 15 ftlb.+/-2 ftlb..
5. Install wire harness on front lid -> 971319 Removing and installing wire harness on front lid - section on "Installing" 971519 Removing and Installing Front Wire Harness
6. Install insulation for front lid -> 700419 Removing and installing insulation for front lid - section on "Installing"
7. Closing front lid