Operation CHARM: Car repair manuals for everyone.
Home >> Porsche >> 2010 >> Panamera 4S (970) V8-4.8L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position Sensor: Service and Repair


WM 287319 Removing and installing crankshaft pulse sender

Technical values





Preliminary work

1. Remove cover for front underbody.-> 519219 Removing and installing cover for front underbody - section on "Removing" 519219 Removing and installing Cover For Front Underbody

Removing crankshaft pulse sender





Installation position of crankshaft pulse sender





1. Disconnect the electric connector for the crankshaft pulse sender -arrow-.





Unplugging electric plug connection

2. Unscrew fastening screw -1-.
3. Carefully pull out the crankshaft pulse sender -arrow-.





Crankshaft pulse sender

Installing crankshaft pulse sender

1. Insert the crankshaft pulse sender into the transmission block -arrow-.





Crankshaft pulse sender

2. Tighten fastening screw -1- for the crankshaft pulse sender.





3. Insert cable plug -arrow- until it engages securely.





Plugging in electric connector

Subsequent work

1. Install cover for front underbody -> 519219 Removing and installing cover for front underbody - section on "Installing" 519219 Removing and installing Cover For Front Underbody
pro multis · About Operation CHARM