Solar Sensor, Installation

1. Press the solar sensor into the holder. Note the position.
2. Fit the upper part of the facia in position and plug in the solar sensor connector.
3. Hook in the cable in the upper part of the facia.
4. Tighten the screws securing the upper part of the facia, connect the speakers and screw down the speaker grilles.
5. Fit the A pillar trims.
6. Calibrate the ACC system by pressing the "AUTO" and "VENT" buttons at the same time.

NOTE: During calibration, all previously stored diagnostic trouble codes are erased. Before carrying out calibration, all stored diagnostic trouble codes should be read.