Ignition Discharge Module, Spring Replacement

Ignition discharge module, spring replacement





To check

Check that the springs are intact and in position.


To remove

1 Unplug the ignition discharge modules 1O-pin connector.

2 Remove the ignition discharge modules 4 retaining bolts from the cylinder head.

3 Lift up the ignition discharge module.

4 Turn the ignition discharge module upside down and remove the 8 bolts.

5 Lift off the black bottom part of the ignition discharge module.

6 Use a screwdriver to pry out the old spring.


To fit

1 Fit a new spring.

2 Fit in reverse order.

Tightening torque: 4 bolts on ignition discharge module 11 Nm (8 lbf ft)