Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





NOTE: On initiating calibration, all previous trouble codes will be cleared. Before starting calibration, a readout must be obtained of all trouble codes stored in the memory.

1. Plug in the connector.
2. Smear a thin coating of silicon paste, part No. (45) 30 07 895, on the surface of the fan control unit in contact with the evaporator.
3. Install the fan control unit in place and tighten the screws. Start the ventilation fan and run it at maximum speed. Check that condensate does not leak out of the evaporator. Improve the sealing as necessary.
4. Refit the protective cover.
5. Refit the floor air duct.
6. Refit the panel on the side of the centre console.
7. Refit the glove box.
8. Calibrate the ACC system by pressing the "AUTO" and "OFF" buttons simultaneously.