ETS Control Unit

ETS Control Unit





Object code: 27144

After replacement, the ETS control unit must be recalibrated.
For details of calibration, Calibration of TCS

To remove
1 Move the driver's seat all the way forward and remove the kick plate (two screws).
2 Disconnect the negative (-) battery cable.
3 Remove the cover plate. Lift out the control unit and unplug the connector.

To fit
1 Plug in the connector and fit the control unit in place.
2 Fit the cover plate and kick plate back in place.
3 Reconnect the battery cable.
4 Return the driver's seat to its normal position.