Light Alignment

The equipment for head light beam alignment can be floor mounted or suspended from the ceiling. The suspended type is especially useful when the equipment serves various work stations.

Technical performance
- The headlamp adjustment equipment should be easy to use and install.
- Apart from the headlight beam alignment it should be able to test other road lights.
- There can be no play in the suspension assemblage that might effect the alignment.
- The optical parts must always be true and should be regularly inspected with a level.
- The largest permissible unevenness on the measuring position is max. 1.2 mm.

The equipment should take into consideration the variation between front and wheels with an adjustable scale. The working area must therefore always be measured with a suitable instrument to assess the level of the floor when the front and rear wheels are positioned.

The largest permitted deviation from the center line is ±5 cm counted from the front to the rear wheel. The most suitable way is to mark up the position of the car in the working area.

Documentation concerning the installation and handling should be included in the delivery unit.

The following equipment is compatible:
- Bosch EFLE 60