Flasher/Sound Confirmation

When arming/disarming/unlocking the tailgate using the remote control, a flash/sound confirmation can be received. These are programmable and can be limitedly selected.
The following is the case at delivery:
- if the LH button is pressed to arm the car, the car's direction indicators will flash once for 0.5 seconds. If the LH button is used for unlocking/ disarming, this is indicated by the car's direction indicators flashing 3 times. If the car alarm has been set off, this is shown by 5 flashes when disarming.
- if the RH button is pressed to unlock the tailgate, this is not indicated. It is however possible to program a flash/sound confirmation for this function.

Programming
LH button
Connect the scan tool.
Select "PROGRAMMING".
Select "FLASH/SOUND" and then:
1 "ORIGINAL VALUE" to select programming as at delivery from factory (see above). It is also possible to select sound confirmation for the 3 functions.
2 "ADJUSTING" to select programming other than the factory selection. See Adjusting Flasher/Sound Confirmation.