Theft Alarm Basic Programming

The theft alarm control module has a basic program from the supplier.





So-called EOL programming is then done in the factory. This cannot however meet the requirements of all countries which means that further programming must be carried out at delivery service, see table.





When changing a control module, the alarm must be programmed according to spare parts programming, see table.

Instructions and descriptions of the functions are in Sound Adjustments (Sound Characteristics). Where there are no crosses in the table, the modules are pre-programmed from the supplier.


Important: If new values are programmed at the request of a customer or for any other reason, it is up to the mechanic to make sure that these do not break any laws or insurance requirements that might apply.