Performance Test

Condition
- All doors and windows should be closed.
- Engine speed should be 1500-2000 rpm.
- All panel vents should be open.
- ACC: "LO" should be selected on the ACC unit (maximum fan speed, distribution flap in VENT position and recirculation on).
- Manual A/C: Fan speed 4.
- Manual A/C: Distribution flap in "VENT" position.
- Manual A/C: Recirculation.
- Manual A/C: Heater controls on full cooling.
- Take a temperature reading 100 mm inside the centre panel vent. Take the reading when five minutes have elapsed.

Readings
- The temperature should be between 6 °C and 12 °C. The difference between turn-on and turn-off should be between 3 °C and 6 °C.
- For pressure measurement, refer to "Draining and Filling of Refrigerant". Service and Repair