ACTIVATE Command Menu

COMMAND MENU READ ACTIVATE

When a system function is activated with ISAT scan tool, it means that the Transmission Control Module (TCM) is carrying out a command which is not normal from a functional point of view. In activation mode ISAT checks the functionality of the TCM and the activation command should therefore be used with discrimination.

An activated function is always re-set when you leave the activation mode and continue in the ISAT menu.

Always clear any fault codes in the transmission system or any other system when you finish the job.

IMPORTANT: You can only enter activation mode in gear position N. In all other gear positions ISAT's display will read SHIFT TO N AND THEN PRESS ENTER. All activation commands can be interrupted with ESC.