With VSS

Electronic control module power supply
- The +30 power supply goes via fuse 23 to pin 25 of the electronic control module.
The +30 circuit supplies power to all the control module functions except those supplied by the +15 circuit.
- The +30 power supply for the direction indicators goes via fuse 25 to pin 22 of the electronic control module.
- The +B power supply goes to pin 9 of the electronic control module.
- The +15 power supply goes via fuse 17 to pin 10 of the electronic control module.

Electronic control module ground
Electronic control module main ground (pin 13) is connected to grounding point G14.