Operation CHARM: Car repair manuals for everyone.
Home >> Saab >> 1996 >> 900 S Convertible L4-2290cc 2.3L DOHC >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Ignition Switch >> Service and Repair >> With Automatic Transaxle
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

With Automatic Transaxle

NOTE: Component identifier numbers used in the following illustrations relate to specific steps in the procedures below.





Removal
1. Move the selector lever to position P and remove the key.
2. Loosen the selector lever housing by such an amount that it can be turned to one side.
3. Unplug the electrical connector.
4. Remove the ignition switch contacts.
5. Remove the ignition switch.
- The screws must be heated with a hot-air gun to soften the thread lock adhesive.

NOTE: Protect the adjacent plastic components.

Installation
1. Install the ignition switch with thread lock adhesive part No. 74 96 268, or equivalent, on the screws.
2. Install the ignition switch contacts with thread lock adhesive on the screws.
3. Plug in the electrical connector.
4. Install the selector lever housing.
5. Check the parking lock clearance.
pro multis · About Operation CHARM