Brake Switch (Cruise Control): Service and Repair

Brake Switch (Cruise Control)
1 Remove the lower pant of the dashboard.
2 Unplug the connector.
3 Pry the switch loose, using a screwdriver.
4 Pull out the switch push rod before installation. Depress the pedal, install the switch on the bracket and carefully release the pedal.

Brake lights switch
1 Remove the lower pant of the dashboard.
2 Turn the brake lights switch in either direction and lift it out.
3 Unplug the connector.
4 Pull out the switch push rod before installation. Depress the pedal, install the switch on the bracket and carefully release the pedal.