Control Module, Motronic

To remove
1 Detach the ground cable on the battery.






2 Remove the glove box.
On right-hand drive cars: Dismantle the lower section of the dashboard.







3 Fold back the carpet and remove the central locking system relay.
4 Unplug the connector.
5 Dismantle the control module.

To fit







1 Fit the control module.
2 Plug in the control module connector.
3 Fit the central locking relay and fold back the carpet.
4 Refit the glove box.
On right-hand drive cars:
Fit the lower section of the dashboard.
5 Fit the battery ground cable.
Set the clock and possible radio codes.
Test drive the car to adapt the new control module.