Control Module

To remove
1 Turn off the ignition.







2 Remove the glove box.
3 Fold back the carpet.






4 Unplug the connector and remove the screw securing the control module. Remove the control module.

To fit

1 Fit the control module, one screw.






2 Plug in the connector
3 Make sure the engine can be started.
4 Replace the carpet.
5 Fit the glove box.






6 Reset the immobilizer as follows:
- Connect Tech2 and turn the ignition key to ON
- Select Body and TWICE
- Select Immobilizer. After about 10 seconds, the immobilizer is programmed.