Control Module

To remove
1. Turn off the ignition.







2. Remove the glove box.
3. Fold back the carpet.







4. Unplug the connector and remove the screw securing the control module. Remove the control module.

To fit
1. Fit the control module, one screw.







2. Plug in the connector
3. Make sure the engine can be started.
4. Replace the carpet.
5. Fit the glove box.







6. Reset the immobilizer as follows:
- Connect Tech2 and turn the ignition key to ON
- Select Body and TWICE
- Select Immobilizer. After about 10 seconds, the immobilizer is programmed.