DICE Control Module (628)

DICE Control Module

To remove







1. Undo the knee shield above the pedal bracket
2. Lift off the air duct for easier access to the relay retainer behind it. (Only LHD)







3. Undo the screw securing the relay retainer and place it out of the way.
4. Undo the screws to the bracket on which the control module is mounted.
5. Unplug the connectors on the DICE control module and remove the screws. Lift off the DICE control module.

To fit







1. Fit the control module to the bracket with two screws and plug in the connectors to the control module.
2. Fit the bracket.
3. Reposition the relay retainer and tighten the screws.







4. Fit the knee shield.
5. Spare parts programming must be carried out after changing the DICE control module. Follow the instructions given in the "Programming" menu in the diagnostic tool.