Brake Switch (Cruise Control): Service and Repair

Brake Pedal Switch

To remove

1. Remove the pedal bracket's cover by undoing the 3 screws and clip. Bend the cover down and carefully withdraw it. Mind the leads running to the data link connector and the wiring for the lighting.







2. Carefully turn switch 1 90 degrees clockwise and pull it out of the holder.







3. Unplug the connector.

To fit







1. Spray the connector with Kontakt 61( part no. 30 04 520).
2. Carefully pull out the switch's pushrod to its stop position.
3. Depress the brake pedal and fit the switch.
4. Carefully release the pedal.
5. Plug in the connector.
6. Fit the pedal bracket's cover in reverse order.