P0700

DTC P0700 TRANSMISSION CONTROL SYSTEM (MIL REQUEST)

1. OUTLINE OF DIAGNOSIS
AT C/U performs CAN communication. It judges as NG if malfunction is detected.




2. ENABLE CONDITION

3. GENERAL DRIVING CYCLE
Always perform diagnosis continuously.




4. DIAGNOSTIC METHOD
Judge NG when the continuous time of completing the malfunction criteria below becomes more than 2.5 seconds.
Judge OK and clear the NG when the malfunction criteria below are not completed.

5. DTC CLEAR CONDITION
^ When the OK driving cycle was completed 40 consecutive times.
^ When "Clear Memory" was performed.

6. MALFUNCTION INDICATOR LIGHT CLEAR CONDITION
^ When the OK driving cycle was completed 3 consecutive times.
^ When "Clear Memory" was performed.

7. FAIL-SAFE
None

8. ECM OPERATION AT DTC SETTING
Store the freeze frame data. (For test mode $02)