Power Mirror Control Module: Service and Repair
Control Module, PMM
To remove
IMPORTANT:
- ESD-SENSITIVE COMPONENT
- Earth yourself by touching the car body before plugging in / unplugging components. Do not touch the component pins. Read "Before changing a control module" before changing a control module.
1. Remove the glove box.
2. Remove the air duct.
3. Unhook the control module from the plastic clip.
4. Unplug the connector.
To fit
IMPORTANT:
- ESD-SENSITIVE COMPONENT
- Earth yourself by touching the car body before plugging in / unplugging components. Do not touch the component pins. Read "Before changing a control module" before changing a control module.
1. Plug in the connector.
2. Fit the control module.
3. Fit the air duct.
4. Fit the glove box.