Cylinder Block

Cylinder block





Cylinder bore





Carrier plate to crankshaft 63 Nm +40 Degrees (48 lbf ft + 40 Degrees) M10

Main Bearing Cap Torque

Crankshaft Main Bearing, Inner Screw 20 Nm +80° (22 ft. lbs. +80°)
Crankshaft Main Bearing, Outer Screw 15 Nm +110° (11 ft. lbs. +110°)
Crankshaft Main Bearing, Side Screw 30 Nm +60° (22 ft. lbs. +60°)

Connecting Rod Bearing Torque and Sequence

Connecting Rod Big End:
Stage 1: 30 Nm (22 ft. lbs.)
Stage 2: back to 0 Nm (0 ft. lbs.)
Stage 3: 25 Nm (18 ft. lbs.)
Stage 4: 110° additional

Crankshaft Pulley Torque

Crankshaft Pulley 100 Nm +150° (74 ft. lbs. +110°)