Keyless Entry Transmitter Battery: Service and Repair

TRANSMITTER BATTERY REPLACEMENT

REMOVAL PROCEDURE




1. Using a number 0 Phillips screwdriver, remove the screw (1) from the transmitter.

NOTE: When replacing the battery, use care not to touch any of the circuitry. Static from your body transferred to these surfaces may damage the transmitter.




2. Open the transmitter case.
3. Remove the battery from the transmitter.

IMPORTANT: Do Not use metal objects to remove battery

INSTALLATION PROCEDURE




1. Install the battery into the transmitter. with the positive side of the battery down.




2. Snap the front and back half of the transmitter together.
3. Install the screw (1).Ensure the screw (1) is fully driven, seated and not stripped.

NOTE: Refer to Fastener Notice.

4. Ensure the transmitter halves are tight to prevent moisture from intruding into the transmitter.