Headlamp Switch: Service and Repair

Headlamp Switch Replacement

Removal Procedure

1. Open the left instrument panel (I/P) access cover.




2. Reach into the access hole and release the 4 retaining tabs located on the headlamp switch behind the I/P.




3. Remove the headlamp switch from the I/P, through the I/P access hole.
4. Disconnect the electrical connectors from the headlamp switch.
5. Remove the headlamp from the I/P.

Installation Procedure




1. Position the headlamp switch near the access hole.
2. Connect the electrical connectors to the headlamp switch.




3. Install the headlamp switch to the I/P. Ensure that the retaining tabs are fully seated.
4. Install the left I/P access cover.