Operation CHARM: Car repair manuals for everyone.
Home >> Saab >> 2008 >> 9-7X L6-4.2L >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Alignment >> Trim Height Specifications
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Trim Height Specifications


Trim Height Specifications

Trim height must be verified and adjusted before aligning the vehicle.

Z Height Measurement

All 53 mm (2.09 in) ± 12 mm (0.47 in)

The Z height measurement determines the proper ride height for the front end of the vehicle. Vehicles equipped with torsion bars use an adjusting arm to adjust the Z height. Vehicles without torsion bars have no adjustment and may require replacement of suspension components.

Important: All dimensions are measured vertical to the ground. Cross vehicle Z heights should be within 24 mm (0.9 in).




D Height Measurement

All 110 mm (4.33 in) ± 4 mm 0.16 in)

The D height measurement determines the proper ride height for the rear end of the vehicle. There is no adjustment procedure. Repair may require replacement of suspension components.

Important: All dimensions are measured vertical to the ground. Cross vehicle D heights should be within 12 mm (0.5 in) for vehicles equipped with coil springs. Vehicles equipped with air suspension should be within 8 mm (0.3 in).
pro multis · About Operation CHARM