Operation CHARM: Car repair manuals for everyone.
Home >> Saab >> 2008 >> 9-7X L6-4.2L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Speed Sensor >> Service and Repair >> NVG 126-NP4 - Transfer Case >> Transfer Case Front Output Shaft Speed Sensor Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transfer Case Front Output Shaft Speed Sensor Replacement



Transfer Case Front Output Shaft Speed Sensor Replacement

Removal Procedure

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).




2. Remove the transfer case front speed sensor electrical connector.




3. Remove the transfer case front speed sensor.

Installation Procedure





Notice: Refer to Fastener Notice (Fastener Notice).

1. Install the transfer case front speed sensor.

Tighten the sensor to 17 Nm (13 ft. lbs.).




2. Install the transfer case front speed sensor electrical connector.
3. Lower the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).

pro multis · About Operation CHARM