Power
Circuit 402
Location: Connects the underhood junction block connector cavity B to the instrument panel junction block connector cavity F5.
Type: Red 12 gage wire.
Function: This circuit provides power to the instrument panel junction block.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 740B
Location: Connects the instrument panel junction block connector cavity B6 to the cigar lighter system.
Type: Orange 18 gage wire.
Function: This circuit provides power to the cigar lighter.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 262/340M
Location: Connects the driver's door key cylinder switch to the door lock relays.
Type: Light Green (Circuit 262) or Orange (Circuit 340M) 20 gage wires.
Function: This circuit provides power to the driver's door key cylinder switch and signals the chime module when the door key is turned to the unlock position.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 340N
Location: Connects instrument panel junction block connector cavity D5 to left front interior door lock switch connector cavity B.
Type: Orange 22 gage wire
Function: This circuit provides power to the left front interior door lock switch.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 340P
Location: Connects instrument panel junction block connector cavity C5 to right front interior door lock switch connector cavity B.
Type: Orange 22 gage wire
Function: This circuit provides power to the right front interior door lock switch.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 194C
Location: Connects instrument panel junction block connector cavity E12 to right front interior door lock switch connector cavity A.
Type: White 22 gage wire
Function: This circuit provides power to the unlock relay coil when the door lock switch is pressed to unlock.
Cheek for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 195C
Location: Connects instrument panel junction block connector cavity A9 to right front interior door lock switch connector cavity C.
Type: Light Blue 22 gage wire
Function: This circuit provides power to the lock relay coil when the door lock switch is pressed to lock.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 195B
Location: Connects the driver's door key cylinder switch connector cavity C to instrument panel junction block connector cavity B12 to the door lock relay.
Type: Light Blue 22 gage wire.
Function: This circuit provides power to the lock relay coil when the door key is turned to the lock position.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 194F
Location: Connects the left front interior door lock switch connector cavity C to instrument panel junction block connector cavity Dl2.
Type: White 22 gage wire.
Function: This circuit provides power to the unlock relay coil when the door lock switch is pressed to unlock.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 195A
Location: Connects left front interior door lock switch connector cavity A to instrument panel junction block connector cavity A12.
Type: Light blue 22 gage wire.
Function: This circuit provides power to the lock relay coil when the door lock switch is pressed to lock.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 294J (Sedan and Wagon)
Location: Connects the right rear door lock motor connector cavity A to instrument panel junction block connector cavity F10.
Type: Tan 18 gage wire.
Function: This circuit sends a signal to the right rear door lock motor.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 295J (Sedan and Wagon)
Location: Connects the right rear door lock motor connector cavity B to instrument panel junction block connector cavity A10.
Type: Gray 18 gage wire.
Function: This circuit sends a signal to the right rear door lock motor.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 294B/294F
Location: Connects the right front door lock motor connector cavity B to instrument panel junction block connector cavity D10.
Type: Tan 18 gage wire.
Function: This circuit sends a signal to the right front door lock motor.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 294G (Sedan and Wagon)
Location: Connects the left rear door lock motor connector cavity A to instrument panel junction block connector cavity F12.
Type: Tan 18 gage wire.
Function: This Circuit sends a signal to the left rear door lock motor.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 295B/295F
Location: Connects the right front door lock motor connector cavity A to instrument panel junction block connector cavity C12.
Type: Gray 18 gage wire.
Function: This circuit sends a signal to the right front door lock motor.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 295G (Sedan and Wagon)
Location: Connects the left rear door lock motor connector cavity B to instrument panel junction block connector cavity B10.
Type: Gray 18 gage wire.
Function: This circuit sends a signal to the left rear door lock motor.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 294E/294K
Location: Connects the left front door lock motor connector cavity B to instrument panel junction block connector cavity E10.
Type: Tan 18 gage wire.
Function: This circuit sends a signal to the left front door lock motor.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 295E/295K
Location: Connects the left front door lock motor connector cavity A to instrument panel junction block connector cavity C10.
Type: Gray 18 gage wire.
Function: This circuit sends a signal to the left front door lock motor.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Check for OPENS/SHORTS.