Parking Brake System: Adjustments

Fig. 2 Parking Brake Adjustment:

1. Disconnect battery ground cable.
2. Remove center console assembly.
3. Raise and support vehicle.
4. Pull parking brake lever to third click from released position.
5. Tighten adjuster nut, Fig. 3. , until slight brake drag is felt at rear wheel.
6. Apply and release parking brake several times.
7. Pull lever up to second click. There should be no brake drag at rear wheels.
8. Pull brake lever to third click. There should be slight drag at rear wheels. Adjust if necessary.
9. Pull lever to fourth click. Rear wheels should not turn by hand.
10. Reverse procedure to install center console assembly.