Operation CHARM: Car repair manuals for everyone.

Cylinder Head Bolt Torque and Sequence

NOTICE: The torque specifications in this article have been updated from the GM service information website.


CYLINDER HEAD TORQUE PROCEDURE




Head Bolt Torque Sequence:






a. In sequence, torque the cylinder head bolts to 30 Nm (22 ft.lbs.).

b. In sequence, torque all bolts to 45 Nm (33 ft.lbs.)

c. Install torque angle gage SA9140E (Snap-on Tool 360 or equivalent.)
d. Calibrate gage to zero.
e. In sequence, turn each bolt an additional 90 degrees.