SC1
Circuit iO2A
Location: Connects underhood junction block connector cavity B to ignition switch connector cavity A.
Type: Red 12 gage wire
Function: This circuit provides power to the ignition switch.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 202
Location: Connects underhood junction block connector cavity A to ignition switch connector cavity H.
Type: Red 12 gage wire
Function: This circuit provides power to the ignition switch.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good, go to the next item indicated on the "Complaint-Condition" chart.
Circuit 300
Location: Connects ignition switch connector cavity B to instrument panel junction block connector cavity F9.
Type: Orange 14 gage wire
Function: This circuit provides power to the instrument panel junction block.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 3C
Location: Connects ignition switch connector cavity F to instrument panel junction block connector cavity F11.
Type: Pink 14 gage wire
Function: This circuit provides power to the instrument panel junction block.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good, go to the next item indicated on the "Complaint-Condition" chart.
Circuit 641A
Location: Connects instrument panel junction block connector cavity E10 to underhood junction block connector cavity D10.
Type: Brown 22 gage wire
Function: This circuit provides power to the DRL relay in the instrument panel junction block.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 39C
Location: Connects instrument panel junction block connector cavity A6 to instrument panel cluster connector cavity L.
Type: Pink 22 gage wire
Function: This circuit provides power to instrument panel cluster internal components and telltales.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 1040A
Location: Connects underhood junction block connector cavity A3 to instrument panel cluster connector cavity M.
Type: Orange 22 gage wire
Function: This circuit provides power to instrument panel cluster internal components and telltales.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart
Circuit 592
Location: Connects instrument panel cluster connector cavity L to underhood junction block connector cavity D4.
Type: Light green/black 22 gage wire
Function: This circuit grounds the DRL relay when the DRL mode is active.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 1134
Location: Connects instrument panel cluster connector cavity F to park brake switch connector cavity A.
Type: Light Blue 22 gage wire
Function: This circuit grounds the brake telltale and is an input to the DRL module (disables DRL function).
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit l2OiH
Location: Connects instrument panel cluster connector cavity 0 to underhood junction block connector cavity E6.
Type: Dark Blue 22 gage wire
Function: This circuit provides a ground signal to the DRL module to turn off the DRL function when the low beam headlamps are On.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit l2OOE
Location: Connects instrument panel cluster connector cavity N to headlamp switch connector cavity E.
Type: Pink 22 gage wire
Function: This circuit provides a ground signal to the DRL module to turn on the high beam telltale when the flash-to-pass or the high beams have been activated.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 1200C
Location: Connects underhood junction block connector cavity D12 to headlamp switch connector cavity G.
Type: Pink 20 gage wire
Function: This circuit provides a ground for the high beam headlamps when the headlamp switch is in the flash-to-pass or high beams ON position.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 12O1C
Location: Connects underhood junction block connector cavity E7 to headlamp switch connector cavity A.
Type: Dark Blue 22 gage wire
Function: This circuit provides a ground for the low beam headlamps when the headlamp switch is in the low beams ON position.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 1200B
Location: Connects underhood junction block connector cavity C12 to left high beam headlamp connector cavity B.
Type: Pink 22 gage wire
Function: This circuit provides a ground for the left high beam headlamp when the headlamp switch is in the flash-to-pass or high beams ON position.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit l2OlB
Location: Connects underhood junction block connector cavity AS to left low beam headlamp connector cavity B.
Type: Dark Blue 22 gage wire
Function: This circuit provides a ground for the left low beam headlamp when the headlamp switch is in the low beams ON position.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 1200A
Location: Connects underhood junction block connector cavity B12 to right high beam headlamp connector cavity B.
Type: Pink 18 gage wire
Function: This circuit provides a ground for the right high beam headlamp when the headlamp switch is in the flash-to-pass or high beams ON position.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 1201A
Location: Connects underhood junction block connector cavity A7 to right low beam headlamp connector cavity B.
Type: Dark Blue 20 gage wire
Function: This circuit provides a ground for the right low beam headlamp when the headlamp switch is in the low beams ON position.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 40A
Location: Connects underhood junction block
connector D2 to left high beam headlamp connector
cavity A.
Type: Orange 22 gage wire
Function: This circuit provides power to the left high beam headlamp.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 4011
Location: Connects underhood junction block
connector D3 to left low beam headlamp connector
cavity A.
Type: Orange 22 gage wire
Function: This circuit provides power to the left low beam headlamp.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 140A
Location: Connects underhood junction block connector F3 to right high beam headlamp connector cavity A.
Type: Orange 20 gage wire
Function: This circuit provides power to the right high beam headlamp.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.
Circuit 14011
Location: Connects underhood junction block connector F2 to right low beam headlamp connector cavity A.
Type: Orange 20 gage wire
Function: This circuit provides power to the right low beam headlamp.
Check for OPENS/SHORTS.
Repair as needed.
If this component is good go to the next item indicated on the "Complaint-Condition" chart.