SC2

I/P Cluster


Refer to Instrument Panel Cluster". Instrument Panel, Gauges and Warning Indicators


Headlamp Switch


Refer to "Lever Combination Switch (LCS)" for testing. Combination Switch



Repair/replace as needed.

If this component is good go to the next item indicated on the "Complaint-Condition" chart.


Headlamps


Visually inspect the headlamps. Check resistance through the lamp.


Check connections/terminals for damage or corrosion. Repair/replace as needed.


If this component is good. go to the next item indicated on the "Complaint-Condition" chart.

Headlamp Pigtail and Connector


Check resistance through the pigtail and connector. Check connections/terminals for damage or corrosion. If this component is good, go to the next item indicated on the "Complaint-Condition" chart.


Headlamp Door Control Module


Headlamp will not open/close.


1. Inspect hood, fender and all structure surrounding the retractable door and mechanism for jamming and interference.


2. Check battery for state of charge.


3. Inspect all electrical connections and terminals for tightness/corrosion/damage at headlamp door control module and headlamp door motors.


4. If one door motor is not working, cross connect motor to determine if motor is not working or headland control module output is not working.


5. Repair/replace as needed.


6. Check light switch operation and connections.


7. Operate motor by hand. Turn knob on top of motor. If output shaft does not turn replace motor.


8. If output shaft did turn inspect linkage for damage or foreign objects.


Repair/replace as needed.


If this component is good, go to the next item indicated on the "Complaint-Condition" chart.


Headlamp Door Motor


Check for continuity through the motor. Check connections/terminals for damage or corrosion.


Operate motor by hand. Turn knob on top of motor. If output shaft does not turn replace motor.


If output shaft did turn inspect linkage for damage or foreign objects.


Repair/replace as needed.


If this component is good, go to the next item indicated on the "Complaint-Condition" chart.