SC2
L HDLP Fuse
Location: Underhood junction block
Type: 10A Minifuse
Feeds: Circuits 40A and 40B
if one of the following systems is operating normally, the fuse is most likely good:
^ Left high beam
^ Left low beam
If the fuse is blown determine the cause of the blown fuse and repair.
Replace fuse as needed.
If this component is good, go to the next item indicated on the "Complaint-Condition" chart.
R HDLP Fuse
Location: Underhood junction block
Type: 10A Minifuse
Feeds: Circuits 140A and 140B
If one of the following systems is operating normally, the fuse is most likely good:
^ Right high beam
^ Right low beam
If the fuse is blown determine the cause of the blown fuse and repair.
Replace fuse as needed.
If this component is good, go to the next item indicated on the "Complaint-Condition" chart.
LH DR Fuse
Location: Underhood junction block
Type: 10A Minifuse
Feeds: Circuit 1340
If the following system is operating the fuse is most likely good.
^ Left headlamp door
If the fuse is blown determine the cause of the blown fuse and repair.
Replace fuse as needed.
If this component is good, go to the next item indicated on the "Complaint-Condition" chart.
RH DR Fuse
Location: Underhood junction block
Type: 10A Minifuse
Feeds: Circuit 1440
^ Right headlamp door
If the fuse is blown determine the cause of the blown fuse and repair.
Replace fuse as needed.
If this component is good, go to the next item indicated on the "Complaint-Condition" chart.
Park Fuse
Location: Underhood junction block
Type: 10A Minifuse
Feeds: Circuit 240
If the following system is operating the fuse is most likely good.
^ All lighting except for high/low beam headlamps
If the fuse is blown determine the cause of the blown fuse and repair.
Replace fuse as needed.
If this component is good, go to the next item indicated on the "Complaint-Condition" chart.
Hazard Fuse
Location: I/P junction block
Type: 10A Minifuse
Feeds: Circuit lO4OA
if the following system is operating normally, the fuse is most likely good:
^ Front park/turn lamps
^ Rear lamp bulbs
If the fuse is blown, determine the cause of the blown fuse and repair.
Replace fuse as needed.
If this component is good, go to the next item indicated on the "Complaint-Condition" chart.