SC2

Circuit 1200E


Location: Connects I/P cluster connector cavity N to headlamp switch connector cavity E.


Type: Pink 22 gage wire


Function: This circuit provides ground for the high beam telltale in the I/P cluster.


Check for OPENS/SHORTS.


Repair as needed.


If this component is good, go to the next item indicated on the "Complaint-Condition" chart.


Circuit 12O1C


Location: Connects underhood junction block connector cavity E7 to headlamp switch connector cavity A.


Type: Dark blue 22 gage wire


Function: This circuit provides ground for both low beam bulbs.


Check for OPENS/SHORTS.


Repair as needed.


If this component is good. go to the next item indicated on the "Complaint-Condition" chart.


Circuit 1200C


Location: Connects underhood junction block connector cavity Dl2 to headlamp switch connector cavity G.


Type: Pink 20 gate wire


Function: This circuit provides ground for both high beam bulbs.


Check for OPENS/SHORTS.


Repair as needed.


If this component is good. go to the next item indicated on the "Complaint-Condition" chart.


Circuit 1040A


Location: Connects instrument panel junction block connector cavity A3 to I/P cluster connector cavity M.


Type: Orange 22 gage wire


Function: This circuit provides power to the high beam telltale in the I/P cluster.


Check for OPENS/SHORTS.


Repair as needed.


If this component is good, go to the next item indicated on the "Complaint-Condition" chart.

Circuit 1201E


Location: Connects left high/low beam connector cavity F to underhood junction block connector cavity A8.


Type: Dark blue 22 gage wire


Function: This circuit provides ground for the left high/low beam headlamp. This wire grounds the low beam filament.

Check for OPENS/SHORTS.

Repair as needed.

If this component is good, go to the next item indicated on the "Complaint-Condition" chart.

Circuit 1200F


Location: Connects left high4ow beam connector cavity G to underhood junction block connector cavity C12.


Type: Pink 22 gage wire

Function: This circuit provides ground for the left high/low beam headlamp. This wire grounds the high beam filament.

Check for OPENS/SHORTS.

Repair as needed.

If this component is good, go to the next item indicated on the "Complaint-Condition" chart.

Circuit 1200G

Location: Connects right high/low beam connector cavity G to underhood junction block connector cavity B12.

Type: Pink 20 gage wire

Function: This circuit provides ground for the right high/low beam headlamp. This wire grounds the high beam filament.

Check for OPENS/SHORTS.

Repair as needed.

If this component is good, go to the next item indicated on the "Complaint-Condition" chart.

Circuit 1201F

Location: Connects right high/low beam connector cavity F to underhood junction block connector cavity A7.

Type: Dark blue 20 gage wire

Function: This circuit provides ground for the right high/low beam headlamp. This wire grounds the low beam filament.

Check for OPENS/SHORTS.

Repair as needed.

If this component is good, go to the next item indicated on the "Complaint-Condition" chart.

Circuit 1200H

Location: Connects headlamp door control module connector cavity B to underhood junction block connector cavity C12.


Type: Pink 22 gage wire


Function: This circuit provides ground for the headlamp door control module This wire grounds the headlamp door module when the headlamp switch is held in the flash-to-pass position.

Check for OPENS/SHORTS.

Repair as needed.

If this component is good, go to the next item indicated on the "Complaint-Condition" chart.


Circuit 10B/10A


Function: These circuit provides ground for the headlamp door control module. The circuits ground when the headlamp switch is turned to headlamp On.

Circuit 1011

Location: Connects headlamp door control module connector cavity A to underhood junction block connector cavity B9.

Type: Yellow 22 gage wire

Check for OPENS/SHORTS.

Repair as needed.

If this component is good, go to the next item indicated on the "Complaint-Condition" chart.

Circuit 10A

Location: Connects underhood junction block connector cavity E8 to headlamp switch connector cavity B.


Type: Yellow 22 gage wire

Check for OPENS/SHORTS.


Repair as needed.


If this component is good, go to the next item indicated on the "Complaint-Condition" chart.


Circuit 240


Location: Connects underhood junction block connector cavity C2 to headlamp switch connector cavity F.

Type: Orange 22 gage wire


Function: This circuit provides power to the headlamp door control module through the headlamp switch.


Check for OPENS/SHORTS.


Repair as needed.


If this component is good, go to the next item indicated on the "Complaint-Condition" chart.

Circuit 306/306A


Function: These circuits provide power to the headlamp door control module.


Circuit 306A


Location: Connects headlamp door control module connector cavity D to underhood junction block connector cavity C9.


Type: Dark green 22 gage wire


Check for OPENS/SHORTS.


Repair as needed.


If this component is good, go to the next item indicated on the "Complaint-Condition" chart.


Circuit 306


Location: Connects underhood junction block connector cavity B9 to headlamp switch connector cavity J.


Type: Dark green 22 gage wire

Check for OPENS/SHORTS.


Repair as needed.


If this component is good, go to the next item indicated on the "Complaint-Condition" chart.


Circuit 40C


Location: Connects underhood junction block connector cavity D2 to left high/low beam connector cavity E.


Type: Orange 22 gage wire


Function: This circuit provides power to the left high/low beam.


Check for OPENS/SHORTS.


Repair as needed.


If this component is good, go to the next item indicated on the "Complaint-Condition" chart.


Circuit 140C


Location: Connects underhood junction block connector cavity F3 to right high/low beam connector cavity E.


Type: Orange 22 gage wire


Function: This circuit provides power to the right high/low beam.


Check for OPENS/SHORTS.


Repair as needed.


If this component is good go to the next item indicated on the "Complaint-Condition" chart.


Circuit 1340


Location: Connects underhood junction block connector cavity D1 to headlamp door control module connector cavity C.

Type: Orange 18 gage wire


Function: This circuit provides power to the headlamp door control module. This voltage drives the left headlamp door motor.

Check for OPENS/SHORTS.

Repair as needed.


If this component is good, go to the next item indicated on the "Complaint-Condition" chart.

Circuit 1440


Location: Connects underhood junction block connector cavity B1 to headlamp door control module connector cavity E.

Type: Orange 18 gage wire


Function: This circuits provide power to the headlamp door control module. This voltage drives the right headlamp door motor.

Check for OPENS/SHORTS.

Repair as needed.

If this component is good go to the next item indicated on the "Complaint-Condition" chart.


Circuit 576


Location: Connects headlamp door control module connector cavity D to left headlamp door motor connector cavity C.

Type: Light green 18 gage wire


Function: This circuit provides power to the left headlamp door motor when the door moves in one direction and serves as a ground when the door moves in the opposite direction.


Check for OPENS/SHORTS.

Repair as needed.


If this component is good, go to the next item indicated on the "Complaint-Condition" chart.

Circuit 577


Location: Connects headlamp door control module connector cavity C to left headlamp door motor connector cavity B.


Type: Dark Green 18 gage wire


Function: This circuit provides power to the left headlamp door motor when the door moves in one direction and serves as a ground when the door moves in the opposite direction.


Check for OPENS/SHORTS.

Repair as needed.


If this component is good, go to the next item indicated on the "Complaint-Condition" chart.

Circuit 578


Location: Connects headlamp door control module connector cavity A to left headlamp door motor connector cavity C.

Type: Light Blue 18 gage wire


Function: This circuit provides power to the right headlamp door motor when the door moves in one direction and serves as a ground when the door moves in the opposite direction.


Check for OPENS/SHORTS.

Repair as needed.

If this component is good, go to the next item indicated on the "Complaint-Condition" chart.


Circuit 579


Location: Connects headlamp door control module connector cavity B to left headlamp door motor connector cavity B.

Type: Blue 18 gage wire

Function: This circuit provides power to the right headlamp door motor when the door moves in one direction and serves as a ground when the door moves in the opposite direction.

Check for OPENS/SHORTS.

Repair as needed.

If this component is good, go to the next item indicated on the "Complaint-Condition" chart.