Components

Brake Switch


Check connections and terminals for damage, tightness, or corrosion.


Check switch resistance pin A (gray connector) to pin C or D (black connector).


Switch resistance: Open when brake not depressed. Less than one ohm when brake depressed.


Repair/replace as needed.


If this component is good, go to the next item indicated on the "Complaint-Condition" chart.

Description:

Description:

Rear Turn/Stop Lamp Assemblies


Check connections and terminals for damage, tightness, or corrosion.


Check resistance through the bulb sockets.


Repair/replace as needed.


If this component is good, go to the next item indicated on the "Complaint-Condition" chart.


Front Park/Turn Lamp Assemblies


Check connections and terminals for damage, tightness. or corrosion.


Check resistance through the bulb sockets.


Repair/replace as needed.


If this component is good, go to the next item indicated on the "Complaint-Condition" chart.

Bulbs


Check connections and terminals for damage, tightness, or corrosion.


Visually inspect the bulb. Check resistance through the bulb.


Repair/replace as needed.


If this component is good, go to the next item indicated on the "Complaint-Condition" chart.


I/P Cluster


Refer to "Instrument Panel Cluster".


Center High Mount Stop Lamp


Check connections and terminals for damage, tightness, or corrosion.


Check resistance through the bulb sockets.


Repair/replace as needed.


If this component is good, go to the next item indicated on the "Complaint-Condition" chart.

Description:

Turn/Hazard Switch


Refer to "Lever Combination Switch (LCS)" for testing. Combination Switch



Repair/replace as needed.


If this component is good go to the next item indicated on the "Complaint-Condition" chart.